Hello, welcome to visit Shenzhen OMG Technology Co., Ltd.!

CHINESE   |   ENGLISH   |   MESSAGES

 

Service hotline:

86-755-27296008

+86-0-18926549366

Contact us

Miss Yu
Tel:+86 13480035394
E-mail:
sally@amg-tech.com
            15174688@qq.com

address:Bao'an District of Shenzhen manhole Centre Road, No. 108

            Rui Jun Business Building No. 10K

  • Product name: Bit cutter diameter measurement
  • Product number: LSG-1040
  • Added time: 2016-03-05
  • Retail price:

Laser scan micrometer LSG-1040S

 

1, Outline of LSG-1040S:

Product use optical scanning measurement method, non-contact measurement method to measure the objects of diameter, width and thickness, ovality. Product is suitable for wire, cable, pipes or rods on-line measurement and monitoring. Product is suitable for quality inspection, material classification etc. Instrument has external access interface can be accessed DPM series displayer and controller, PLC or computer.

2, Principle of measurement,

The laser beam emitted from the semi-conductive laser “a” is deflected by the fast rotating octoangular prism “b” driven by the motor “c”. After scanning and passing the lens “d”, the beam becomes a beam of parallel light running through the measurement zone (gate). If the object to be measured “e” is located in the gate, it will block part of the parallel light. After the parallel light is transmitted through the focusing lens “f”, the blocked part will be transformed into a low level electric signal while the unblocked part will be transformed into a high level electric signal by the photoelectric tube “g”. The outer diameter of the tested object in the direction of the scanning light may be calculated from the scanning time of the low-level electric signal.

3Product specification:

 

 

Product Model:

LSG-1040S

Measuring range: mm

0.10 to 30.0 mm

Display resolution: mm

0.00001mm

Measurement accuracy: mm

±0.0003

 

 

Working principle:

Non-contact laser scanning method

Light source:

Visible Laser Diode Class 2, wave is 650 nm

Display method:

Local displayer, two rows

6 digit red LED display

Display frequency:

0.2 time/ second  (adjustable)

Scanning speed:

1600 times/ second

Signal output:

Supplied

Data collection and analysis:

Supplied (computer and software is required)

Alarm signal output:

Supplied, It has two relay output, include upper and lower limited

Transparency measurements:

support  (please inform seller this requirement when place Order)

Power supply:

100V to 240V AC, 50Hz60Hz

Power consumption: Watts

≤15W

Ambient temperature:

545

Relative humidity:

35-85% ( No condensation water )

Environmental requirements:

No corrosive gas, oil, steam and considerable dust in the atmosphere

Product Net Weight: kg

3.6 kg

Measurement unit size: mm

298*133*49 mm

Product protection:

Dustproof and Waterproof design (but can’t drop-into water)

Communication interface:

RS485 interfaceit can be accessed DPM series displayer, PLC or computer etc.

 

 

4Features of LSG-40: 

lHigh-Precision, good repeatability, the entire measurement zone are guaranteed accuracy. Completely non-contact, guide roller is un-necessary.

lAdopt high-precision F (θ) lens, object vibration is un-influence measurement.

lUse laser scanning method, measurement gate and rang is wide.

lMeasurement unit is compact design, adopt SMD circuit design, small size, weight is light. Anti-interference ability is good.

lInstruments has RS485 communication interface, it can connect to FD-1 series displayer, PLC or computer on-line communication.

lMeasuring result is uninfluenced by impurity light and smog, measurement result is stability.

lInstrument has alarm output interface to connect external alarm.

lIt has control signal output (it needs to configure FD-1 display controller).

 

 

 

5LSG-40 Product application, suitable for the following industries diameter measurement, the width and thickness measurement.

lCable industry: varies wire and cable, LAN cable, coaxial cable, fiber optic cable, flat cable, RF cable, communication cable, power cable etc. Extrusion line measurement and automation control.

lWire industry: nylon wire, plastic wire, textile lines, copper wire rod, wire etc.

lPipe industry: metal pipes, plastic pipes, glass, transparent or translucent objects such as diameter measurements.

lMedical Industry: Medical infusion tube / pipe measurements.

lHardware industry: a variety of rods or shafts measurement, measure the width of strip thickness measurement.

lOther industries: on-line measurement, off-line measurement, quality inspection, other specialized measurements.

 

6LSG - 40 product pictures: detailed dimension drawing

Home | aAbout usProducts |  News center  |  Application  | Download  |  Messages  |  Contact us
Copyright 2016 (C)  ShenZhen OMG Technology Co., Ltd.  Powered by 300  粤ICP备11011791号