Hello, welcome to visit Shenzhen OMG Technology Co., Ltd.!

CHINESE   |   ENGLISH   |   MESSAGES

 

Service hotline:

86-755-27296008

+86-0-18926549366

Contact us

Miss Yu
Tel:+86 13480035394
E-mail:
sally@amg-tech.com
            15174688@qq.com

address:Bao'an District of Shenzhen manhole Centre Road, No. 108

            Rui Jun Business Building No. 10K

Your present location:Home >> Products >> Laser scanning measuring instrument >> DBeat / yaw / ellipticity / straightness measuring instrument, etc. >> LGD-60 Laser measuring instrument
  • Product name: LGD-60 Laser measuring instrument
  • Product number: LGD-60Laser measuring instrument
  • Added time: 2016-04-12
  • Retail price:

Laser scan micrometer LGD-60

 

1, Outline of LGD-60:

 

Product use optical scanning measurement method, non-contact measurement method to measure the objects of diameter, width and thickness, ovality. Product is suitable for wire, cable, pipes or rods on-line measurement and monitoring. Product is suitable for quality inspection, material classification etc. Instrument has external access interface can be accessed DPM series displayer and controller, PLC or computer.

 

 

 

 

2, Principle of measurement,

 

The laser beam emitted from the semi-conductive laser “a” is deflected by the fast rotating octoangular prism “b” driven by the motor “c”. After scanning and passing the lens “d”, the beam becomes a beam of parallel light running through the measurement zone (gate). If the object to be measured “e” is located in the gate, it will block part of the parallel light. After the parallel light is transmitted through the focusing lens “f”, the blocked part will be transformed into a low level electric signal while the unblocked part will be transformed into a high level electric signal by the photoelectric tube “g”. The outer diameter of the tested object in the direction of the scanning light may be calculated from the scanning time of the low-level electric signal.

 

 

 

 

 

 

 

 

 

 

 

 

                                              

3Product specification:

 

 

Product Model:

LGD-60

Measuring range: mm

0.40 to 45.0 mm

Display resolution: mm

0.001mm

Measurement accuracy: mm

0.003±0.02D

Working principle:

Non-contact laser scanning method

Light source:

Visible Laser Diode Class 2, wave is 650 nm

Display method:

Local displayer, 5 digit red LED display

Display frequency:

0.2 time/ second  (adjustable)

Scanning speed:

600 times/ second

Signal output:

Supplied

Data collection and analysis:

Supplied (computer and software is required)

Alarm signal output:

Supplied, It has two relay output, include upper and lower limited

Transparency measurements:

support  (please inform seller this requirement when place Order)

Power supply:

100V to 250V AC, 50Hz60Hz

Power consumption: Watts

≤15W

Ambient temperature:

545

Relative humidity:

35-85% ( No condensation water )

Environmental requirements:

No corrosive gas, oil, steam and considerable dust in the atmosphere

Product Net Weight: kg

5.0 kg

Measurement unit size: mm

400 * 164 * 76 mm

Product protection:

Dustproof and Waterproof design (but can’t drop-into water)

Communication interface:

RS485 interface, Modbus RTU formatit can be accessed DPM series displayer, PLC or computer etc.

 

4Features of LGD-60: 

l  High-Precision, good repeatability, the entire measurement zone are guaranteed accuracy. Completely non-contact, guide roller is un-necessary.

l  Adopt high-precision F (θ) lens, object vibration is un-influence measurement.

l  Use laser scanning method, measurement gate and rang is wide.

l  Measurement unit is compact design, adopt SMD circuit design, small size, weight is light. Anti-interference ability is good.

l  Instruments has RS485 communication interface, it can connect to DPM series displayer, PLC or computer on-line communication.

l  Measuring result is uninfluenced by impurity light and smog, measurement result is stability.

l  Instrument has alarm output interface to connect external alarm.

l  It has control signal output (it needs to configure DPM Series display controller).

 

 

 

5LGD-60 Product application, suitable for the following industries diameter measurement, the width and thickness measurement.

l  Cable industry: varies wire and cable, LAN cable, coaxial cable, fiber optic cable, flat cable, RF cable, communication cable, power cable etc. Extrusion line measurement and automation control.

l  Wire industry: nylon wire, plastic wire, textile lines, copper wire rod, wire etc.

l  Pipe industry: metal pipes, plastic pipes, glass, transparent or translucent objects such as diameter measurements.

l  Medical Industry: Medical infusion tube / pipe measurements.

l  Hardware industry: a variety of rods or shafts measurement, measure the width of strip thickness measurement.

l  Other industries: on-line measurement, off-line measurement, quality inspection, other specialized measurements.

 

 

Home | aAbout usProducts |  News center  |  Application  | Download  |  Messages  |  Contact us
Copyright 2016 (C)  ShenZhen OMG Technology Co., Ltd.  Powered by 300  粤ICP备11011791号