Hello, welcome to visit Shenzhen OMG Technology Co., Ltd.!

CHINESE   |   ENGLISH   |   MESSAGES

 

Service hotline:

86-755-27296008

+86-0-18926549366

Contact us

Miss Yu
Tel:+86 13480035394
E-mail:
sally@amg-tech.com
            15174688@qq.com

address:Bao'an District of Shenzhen manhole Centre Road, No. 108

            Rui Jun Business Building No. 10K

Your present location:Home >> Products >> Laser scanning measuring instrument >> B Off-line measuring instrument >> LGD-10XY Meadical wire enameled wire Laser measuring instrument
  • Product name: LGD-10XY Meadical wire enameled wire Laser measuring instrument
  • Product number: LGD-10XY Laser measuring instrum
  • Added time: 2016-04-12
  • Retail price:

Laser scan micrometer LGD-0510XY-4

 

1, Outline of LGD-0510XY-4:

Product use optical scanning measurement method, non-contact measurement method to measure the objects of diameter, width and thickness, ovality. Product adopts dual axis measurement, Measuring cycle material is high accuracy and easy to use. Measuring flat material can display the width and thickness simultaneously, suitable for flat cable, flat metal wire measurement. Product is suitable for wires or rods on-line measurement and monitoring, quality inspection, material classification etc. Instrument has external access interface can be accessed PLC or computer.

 

2, Principle of measurement,

 

The laser beam emitted from the semi-conductive laser “a” is deflected by the fast rotating octoangular prism “b” driven by the motor “c”. After scanning and passing the lens “d”, the beam becomes a beam of parallel light running through the measurement zone (gate). If the object to be measured “e” is located in the gate, it will block part of the parallel light. After the parallel light is transmitted through the focusing lens “f”, the blocked part will be transformed into a low level electric signal while the unblocked part will be transformed into a high level electric signal by the photoelectric tube “g”. The outer diameter of the tested object in the direction of the scanning light may be calculated from the scanning time of the low-level electric signal.

 

 

3Product specification:

 

Product Model:

LGD-0510XY-4

Measuring range: mm

0.100 to 5.500 mm

Display resolution: mm

0.0001mm

Measurement accuracy: mm

+/- 0.0005mm

Working principle:

Dual axis, Non-contact laser scanning method

Accessories requirement:

Guide roller or V groove is required

Light source:

Visible Laser Diode Class 2, wave is 650 nm

Display method:

Two rows, 5 digit red LED display. Average value, X direction value, Y direction value.

Display frequency:

0.2 time/ second  (adjustable)

Scanning speed:

1200 times/ second

Signal output:

Supplied

Data collection and analysis:

Supplied (computer and software is required)

Alarm signal output:

Supplied, It has two relay output, include upper and lower limited

Transparency measurements:

support  (please inform seller this requirement when place Order)

Power supply:

100V to 250V AC, 50Hz60Hz

Power consumption: Watts

≤15W

Ambient temperature:

545

Relative humidity:

35-85% ( No condensation water )

Environmental requirements:

No corrosive gas, oil, steam and considerable dust in the atmosphere

Product Net Weight: kg

4.7 kg

Measurement unit size: mm

225 * 178 * 62 mm

Displayer size: mm

185 * 125 * 176 mm

Product protection:

Dustproof and Waterproof design (but can’t drop-into water)

Communication interface:

RS485 interfaceit can be accessed DPM series displayer, PLC or computer etc.

 

4Features of LGD-0510XY-4:

Using separated-type design, measurement unit and displayer is separated. Measurement unit is compact design.

Use laser scanning method and high-accuracy. Dual axis measurement is more accurate than the single axis. Product is easy to use.

Adopt SMD circuit design, small size, weight is light. Anti-interference ability is good.

Instruments has RS485 communication interface, it can connect to PLC or computer on-line communication.

Measuring result is uninfluenced by impurity light and smog, measurement result is stability.

Instrument has alarm output interface to connect external alarm.

Suitable for flat cable, flat metal wire measurement etc. Display the width and thickness simultaneously.

 

 

5Product application, suitable for the following industries diameter measurement, the width and thickness measurement, ovality measurements.

Cable industry: varies cable, electronic cable, optical fiber etc.

Wire industry: enameled wire, Nylon wire, copper wire, plastic wire, textile wire measurements.

Medical Industry: Medical infusion tube / pipe measurements.

Hardware industry: variety of rods and shafts measurement, flat material width and thickness measurement.

Other industries: on-line measurement, off-line measurement, quality inspection, other specialized measurements.

 

Home | aAbout usProducts |  News center  |  Application  | Download  |  Messages  |  Contact us
Copyright 2016 (C)  ShenZhen OMG Technology Co., Ltd.  Powered by 300  粤ICP备11011791号