Hello, welcome to visit Shenzhen OMG Technology Co., Ltd.!

CHINESE   |   ENGLISH   |   MESSAGES

 

Service hotline:

86-755-27296008

+86-0-18926549366

Contact us

Miss Yu
Tel:+86 13480035394
E-mail:
sally@amg-tech.com
            15174688@qq.com

address:Bao'an District of Shenzhen manhole Centre Road, No. 108

            Rui Jun Business Building No. 10K

Your present location:Home >> Instrument sense >> LGD-25 60 100 Maintenance Correction V1504

LGD-25 60 100 Maintenance Correction V1504

Date:2016-4-13 17:31

Abstract:

1,LGD-02ShortDescriptionOpticalscanningofthemeasurement,thenon-contactmeasurementofthediameter,widthandthicknessoftheobjectandthelike.Highaccuracy,millionthofamillimeterdisplayresolution.Suitableforfinewire-linemeasurementandmonitoring,andqualitytesting.InstrumentswithexternalaccessinterfacethatcanbeaccessedbythecompanyDPMseriescontroller,PLCorcomputer2,theinstrumentworksSeebelow,thesemiconductorlaser"a"laserbeamisemittedbymotor"c"driveeightprism"b"high-speedrotation,alaserbeamisscannedthroughth

 

1, LGD-02 Short Description

Optical scanning of the measurement, the non-contact measurement of the diameter, width and thickness of the object and the like. High accuracy, millionth of a millimeter display resolution. Suitable for fine wire-line measurement and monitoring, and quality testing. Instruments with external access interface that can be accessed by the company DPM series controller, PLC or computer

 

 

2, the instrument works

 

See below, the semiconductor laser "a" laser beam is emitted by motor "c" drive eight prism "b" high-speed rotation, a laser beam is scanned through the prism "d" is converted to parallel light through the test area (GATE), when the test District analyte "e" when it will be blocking part of parallel light, and by focusing prism "f" is converted into a low level on the photoelectric receiving tube; without analyte shaded parallel light is converted to a high level, low level by calculating the scan time can be calculated from the measured value outside diameter of the laser beam scanning direction, width or thickness values.

 

 

3, LGD-02 product specifications

 

产品型号:

LGD-02

测量范围: 毫米

0.02 –1.0 毫米

分 辨 率: 毫米

0.0001毫米

测量精度: 毫米

±0.0005毫米

工作原理:

非接触式激光扫描

测量辅件:

必配导轮及支架

光    源:

第二代可见激光,波长650纳米

显示方式:

5 位数码管显示

显示频率:

标准为0.2 秒/ 次 (快慢可调节)

扫描速度:

1200 次/

信号输出:

支持

数据采集分析:

支持 (需要外接电脑并配软件)

报警信号输出:

含双继电器报警输出,可分别输出超上差,超下差

透明物测量:

支持

供电电源:

100V to 250V AC, 50Hz~60Hz

仪器功耗: 瓦

小于15

外围温度:

5~45

环境湿度:

35-85% (无冷凝水)

环境要求:

空气中不含腐蚀性气体,严重的油,蒸汽及尘埃。

产品净重:公斤

3.0 公斤(含主机和显示器)

测量主机尺寸:毫米

180 * 100 * 58 毫米

显示器尺寸:毫米

176 * 160 * 66 毫米

产品防护:

整机采用防尘防水保护(但不能够浸泡入水中)

通信接口:

仪器采用RS485通信接口,从通信协议可接本公司打印机,电脑 或PLC等外围设备。

 

4, LGD-02 Features:

l using split design, host and display separate measure. Measurement host compact design.

2 using laser scanning technology, high-precision measurement, display resolution millionth of a millimeter.

3 using SMD circuit, small size, light weight, strong anti-jamming

4 instrument with RS485 communication interface, can communicate with PLC or computer on-line

5 smoke from outside stray light affect the measurement stability

6 Instrument configuration alarm output interface to an external alarm

 

5, LGD-02 Application: Suitable for measuring the diameter of the following sectors.

l wire industry: measuring wire, copper wire measurements. Nylon wire, plastic wire, textile line measurement.

2 cutting line industry: cutting line measurement.

3 micro-drawing industry: micro-drawing, measuring tungsten, molybdenum wire measurement and so on.

4 Fiber Industry: Fiber measurements, a transparency measure.

5 line of high-end electronics industry: Audio Video Cable industry.

 

Other industries: online measurement, off-line measurement, quality testing, and other special measurements.

TypeInfo: Instrument sense

Keywords for the information:

Home | aAbout usProducts |  News center  |  Application  | Download  |  Messages  |  Contact us
Copyright 2016 (C)  ShenZhen OMG Technology Co., Ltd.  Powered by 300  粤ICP备11011791号